Saturday, October 8, 2016

Beware of the IDIoT (Incredibly Dangerous Internet of Things)

Written by John D on The Prepper Journal.

Editor’s Note: This post is another entry in the Prepper Writing Contest from John D. If you have information for Preppers that you would like to share and possibly win a $300 Amazon Gift Card to purchase your own prepping supplies, enter today.


As preppers, we’re perhaps more aware than most of what COULD happen. We hope for the best, but prepare for the worst. To minimize our vulnerability to the lawlessness that would follow an apocalyptic event, we arm ourselves and harden our homes. We actively look for ways to increase our chances of survival. We understand that the household items we depend on every day must be reliable, because they may not be easily replaced after the SHTF.

When we buy a new TV, refrigerator, toaster, microwave oven, or any other appliance, we expect years of reliable operation. Breakdowns are rare in the first few years of the product’s life. The ONLY product that doesn’t consistently measure up, where reliability is concerned, is the personal computer. And, not only do computers have a high failure rate, they can allow outsiders to access personal information.

While computer hardware and software should be more robust, it’s not entirely the manufacturer’s fault. Unlike other appliances, most computers connect to the world-wide-web, providing a potential entry point for hackers. Because a dishwasher, refrigerator, toaster have no such web connection, there is no danger of those items being hacked. At least not yet.

You may believe that everything is under control as far as your computer is concerned. You’ve purchased and installed the latest-greatest anti-virus software. The firewall is configured and turned on. You apply security updates as they become available, run periodic scans, and check removable media each time it’s connected to the computer. These activities are important, but at the same time provide a false sense of security. Hackers look for opportunities to trick you into letting them in, or into disclosing sensitive information. That practice is known as “Social Engineering“. Hackers also look for vulnerabilities in computer hardware and software, and attempt to exploit them BEFORE the anti-virus software is aware of those issues. In an effort to keep up, anti-virus software companies publish and push updates to your computer almost daily. In cases where hackers were one step ahead of the anti-virus software providers, infections have occurred. Still, you don’t worry too much, because you know that for the price of a couple of hamburgers and a six-pack of beer, your nephew can fix just about any problem you may have.

Computers are simply tools. They should conform to our needs, not the other way around.

It seems that we’ve accepted the fact that we have to do a lot, just to keep a computer running, and our data secure. Even though a computer is the only product that requires a lot of attention, we don’t complain, not too much anyway. What does all of this have to do with prepping? Bear with me, I’m getting to that.

Computer technology affects our lives in many ways. It’s in our appliances, and our automobiles. Computers have been in cars for many years, monitoring sensors to detect problems, running the dashboard display, and controlling battery charging, just to name a few tasks. Those computers are reliable, primarily because they’re not grid connected. There’s no remote entry point for hackers, and hackers don’t make house calls. On the other hand, grid connected cars offer features such as traffic reports in real-time, remote starting, and remote unlocking. Features like that would not be possible without remote connections. However, by accepting grid connected cars, we’re headed down a slippery slope. I’m not talking about a far-fetched conspiracy theory, it’s already been proven. Under test conditions, grid connected cars have been hacked. Millions of vehicles have been recalled. If it happens in real-life, the result could be deadly crashes. And, it doesn’t have to be YOUR car that’s hacked. Imagine a hacked car, out of control, coming into your lane of traffic.

When hackers unite, or employ zombie computers, to focus a coordinated attack, it’s known as a Distributed Denial of Service (DDS) attack. While that typically refers to a single company or website, imagine a DDS-like attack on grid connected cars. It’s not hard to imagine a high percentage of cars suddenly going out of control, resulting in mass casualties, and too few resources to deal with them. That could lead to societal collapse, the kind of thing that we, as preppers, prepare for.

Another serious security issue related to automobiles is the remote starting feature. If your car is in a closed garage, attached to your house, a potential for carbon monoxide poisoning exists. Imagine a scenario where a hacker is able to start your car, at night, when everyone in the house is sleeping. It wouldn’t take long for deadly carbon monoxide to spread to every room. Some remote start systems include safety features, but do you really want to put that much faith in technology?

As if connected cars don’t represent enough potential danger, your connected car can be used to track your movements. The same can be said for cell phones and club memberships. I’ll save those issues for a future article.

Will we someday have to apply security patches to our cars, and make appointments with the dealership to have viruses removed? It seems we’re headed in that direction. The computer industry is either unable, or unwilling, to give us hacker-proof products. We can’t count on the computer industry to keep us safe.

Cars are not the only thing we have to worry about. So called “smart appliances” are part of an overall Smart Grid strategy. A major benefit of the Smart Grid is to facilitate reducing electricity usage during periods of high demand. This benefits the consumer, as well as the provider. Today, just about all appliances are available as smart appliances. Collectively known as the “Internet of Things”, or IoT, many are of limited value to the consumer. A smart refrigerator, for example, may cut your electric bill slightly, but offers little advantage other than that. Someday, your smart refrigerator may tell you when food is about to spoil. That’s a good thing, I suppose, when it works correctly. However, if your refrigerator is “hacked”, it may trick you into consuming spoiled food. Imagine that; a hacker can poison you by operating through your refrigerator!

Instead of opting for an expensive smart refrigerator, why not choose a standard model, and adjust its thermostat to the highest temperature setting that still provides an adequate level of cooling? You don’t need to be grid connected to save money.

A smart clothes dryer can be programmed to send an alert to your phone when your clothes are dry. Yes, there’s an app for that, but do your really need it? A hacker may send a signal to apply maximum heat, even after your clothes are dry, in an attempt to start a fire. To believe there is no danger is to put a lot of faith in over-temperature sensors. I don’t want to do that.

Internet control of a home thermostat may allow you to save money on heating and cooling, but it also provides an opportunity for hackers. If a hacker makes adjustments to your thermostat, it’s inconvenient. If a hacker makes adjustments to thousands of thermostats, the result could be a grid overload, leading to a widespread power outage. Consider a locally programmable thermostat instead, not a grid connected one. A locally programmable thermostat, also known as a set-back thermostat, can help to keep your heating and cooling costs down, but without the hacking risk.

Some camera-based home security systems are grid connected. Isn’t it great to be able to keep an eye on your home and pets while you’re away? You might think that you’re the only one who has access to the video feed, but you might be wrong. Imagine hackers watching you as you move around your home, sometimes not fully dressed. The only thing protecting your privacy is your user name and password. Be aware that user names can be easily guessed, and software is available that can easily “crack” passwords, even passwords considered highly secure. There are already reports of security cameras and baby monitors being compromised. In one case, a man was caught screaming obscenities at a baby.

Speaking of camera’s, someone may be watching you RIGHT NOW via your laptop’s built-in web cam. Hackers know how to do that, and can do it without turning on the little red LED camera indicator. Hackers can also disable the “shutter sound” when taking pictures with your web cam. If you’re not using it, cover your web cam with a piece of tape.

When setting up an IoT device, be sure to change the default user name and password to those that cannot be easily guessed. For example: If your name is John Smith, don’t use Jsmith as your user name. It’s too easy to guess. And, as a rule of thumb, don’t use any English word as your password. Instead, consider changing some of the letters to numbers or special characters. For example: The word “Boatman” can be modified by changing the “o” to a zero, and changing the “a’s” to @’s, and by adding a punctuation mark at the end. The result is a much more secure, but easy to remember password, B0@tm@n$.

Even if you do those things, don’t assume that the device is secure. Use encryption, if that feature is available. Many “connected” devices send user names and passwords in plain text., instead of sending them encrypted. As you “log-in”, perhaps from a phone or mobile computing device, a hacker may intercept your credentials, and later use them to impersonate you.

The use of public wi-fi makes you susceptible to two specific types of attacks, Man in the Middle, and Evil Twin. Without going into too much detail about those, an attacker intercepts your communications and steals your information, usually without you knowing about it. Included are your user name and password, making it possible for the hacker to impersonate you at a later time. Avoid public wi-fi when doing banking transactions, accessing credit card accounts, making on-line purchases, and when accessing email.

Protecting sensitive information is not easy in a “connected” world, just ask Hillary Clinton. Although she had help from IT professionals, used sophisticated software, and smashed devices with a hammer, more than 30,000 emails that she tried to hide or destroy, were recovered. Osama Bin Laden understood the danger of being “on-line”. His solution was to employ couriers to transfer sensitive information using removable media, instead of email.

Conclusion

A connected world is a dangerous world. You and your family could be maimed, burned, robbed, stalked, exposed, suffocated, poisoned, or at the very least, embarrassed. Grid connected devices, and devices that send and receive radio signals, give hackers a potential way in. A way in is every much as dangerous as leaving doors unlocked, and keys in your car. Sooner or later someone will notice, and take advantage. While a robust password may stop some intrusions, it won’t stop an experienced hacker. Although you may do everything correctly, a hacker may exploit a software or hardware vulnerability to gain privileged access to your equipment.

Cars and appliances that are not grid connected, or not remotely activated, have no easy entry point for hackers. If you must use high-tech devices, use those that are locally programmable, and not grid connected. Consider low-tech devices, like an old-fashion manual thermostat, instead of a more modern electronic one. Because of its construction, it can’t be hacked, and isn’t susceptible to EMP’s. Low-tech devices are also less susceptible to power surges and lightning strikes, so you may save money by not having to replace them as often.

So what does all of this have to do with prepping? Technology fails in many SHTF scenarios. For that reason it’s wise to avoid dependence on technology. The avoidance of grid connected devices takes this to the next level. It could PREVENT Teotwawki. Preventing Teotwawki is much better than dealing with its aftermath.

Only you can prevent TEOTWAWKI

Only you can prevent TEOTWAWKI

 

About the author: John D has earned several computer industry certifications, including Microsoft Certified Systems Engineer (MCSE), and Security+. He has worked for the U.S. Department of the Interior, and Department of Defense, primarily performing computer and network security-related functions. John D is an experienced microcomputer-based equipment developer, programmer, and an experienced Electronics Technician. He has received commendations for his work, including an award for a device he developed to aid the physically disabled, and an award for his efforts to assist the people of Haiti, in the aftermath of an earthquake. As a hobby, John D is involved with alternative energy projects.

If you liked this article, please rate it.

The post Beware of the IDIoT (Incredibly Dangerous Internet of Things) appeared first on The Prepper Journal.



from The Prepper Journal
Don't forget to visit the store and pick up some gear at The COR Outfitters. How prepared are you for emergencies?
#SurvivalFirestarter #SurvivalBugOutBackpack #PrepperSurvivalPack #SHTFGear #SHTFBag

What did you do to prep this week?

Wow! I think this week has passed by more quickly than the last. Luckily, the collapse or world war three hasn’t happened yet (it’s coming) so we still have time to prep more. The more you and I prep the easier it will be to survive the aftermath.

Remember our motto – Plan, Prepare, Survive.

Okay, before we get started with this weeks “what did you do to prep this week” I’d like to thank Mr. Bill D for his contribution this week via “snail mail” and also Victoria S, Jana M, and Mike R for their generous contributions this week via Paypal.

...

Read the whole entry... »



from TheSurvivalistBlog.net RSS Feed
Don't forget to visit the store and pick up some gear at The COR Outfitters. Are you ready for any situation?
#SurvivalFirestarter #SurvivalBugOutBackpack #PrepperSurvivalPack #SHTFGear #SHTFBag

HOW CLOSE IS A US-RUSSIA WAR?

By Joel M Skousen Editor World Affairs Brief 

NUKE WW3As the US and Russia square up their support on opposite sides of the conflict in Syria, not a few mainstream news sources are beginning to fret about this confrontation breaking out into a larger war, which might go nuclear. In many ways the US is provoking Russia in Syria in sabotaging the ceasefire by attacking Syrian troops with US jets, sending in troops on the ground to advise and arm the Syrian opposition, and threatening a “no fly” zone over any place US troops reside. Most of the talk of war is in the EU and UK but at least one US...

Read the whole entry... »



from TheSurvivalistBlog.net RSS Feed
Don't forget to visit the store and pick up some gear at The COR Outfitters. Are you ready for any situation?
#SurvivalFirestarter #SurvivalBugOutBackpack #PrepperSurvivalPack #SHTFGear #SHTFBag

Prep Blog Review: Are You Ready To Bug Out?

articol

Millions of people around the world find themselves in the situation to bug out. Think about how Hurricane Matthew messed up the lives of so many Americans from Florida to Georgia and Carolinas.

But not all of them know all the useful things about bugging out that you are reading about. Bugging out is not just about having a go out bag to grab when SHTF. Bugging out requires a lot of thinking, planning and physically and mentally preparing.

This week I’ve found 5 great articles on this topic to help you answer this one simple question: are you ready to bug out? Let me know in the comment section bellow.

  1. What mistakes to avoid when bugging out

Bugging out mistakes

“Whether you chose to bug out on your own terms or you are ordered by local authorities to leave your home, make sure you have everything covered. Survival for you and your loved ones may depend on the preparations you make and your chances increase greatly if you avoid these bugging out mistakes.

Bugging out requires some thorough planning and deep thinking because the road is never safe and there are too many unknowns you will have to face and overcome. Even those who prepare for a bugging in scenario must take into account that at some point they will be forced to evacuate.

It’s impossible to precisely predict how a disaster will unfold. Your fortress may be well-equipped, but if you have to leave everything behind, survival will depend on the bugging out plans you’ve made.”

Read more on Prepper’s Will.

  1. Have these go bag essentials

Go bag essentials

“It’s also common to mix up the definition of a go bag and a bug out bag, so let’s first discuss the difference between the two. A go bag is generally a bag that you carry with you that has the essentials of short term survival inside. These bags are designed for 24 hours or less of survival, containing the very basics to help you survive long enough to get home or to another secure location.

Bug out bags are generally used when you literally need to evacuate and leave your home. Bug out bags have enough supplies to last at least 72 hours or more in a survival situation. Inside of these larger bags are essentials for your survival over a longer period of time. In contrast to the go bags, bug out bags are larger and store a heavier amount of gear and are designed for surviving from a few days to a few weeks.”

Read more on Survival Sullivan.

  1. Have a bug out vehicle plan

Bug out car plan

“In the face of disaster, preppers know we need to move quickly. We should be prepared to act in a minute’s notice when we realize our family is in jeopardy. We each have our Bug Out Bags ready to go or they should be but it is a different matter altogether if the family bug out mobile is involved.

How many times have you watched a Prepper show where the family simulated loading all of their gear to escape town? Often it took them much longer than they anticipated and in at least one case, they couldn’t even take their main prep with them.”

Read more on The Prepper Journal.

  1. What papers and documents to take in your bug out bag

important-papers-for-bug-out-bag“A ‘Bug Out Bag’ (or BOB) containing some food & water provisions and various supplies is purposed for an evacuation of sorts… a time when you need to get out or ‘bug out’, for whatever reason or circumstance.

One consideration is to include important papers and documents (or copies thereof) in your BOB, just in case you might need them.

For example, let’s say that there is a high confidence forecast of a hurricane impact in your area and you have decided to leave. As you are putting ‘stuff’ in your vehicle, you realize that your home might be damaged to the point of losing it, and the things inside. Are there important documents that you should take with you?”

Read more on Modern Survival Blog.

  1. Why a dog is the perfect companion for bugging out

dog-bugging-out-companion

“When you are in danger, it is natural to get stressed. However, the way you handle your stress and respond to the danger make a huge difference to whether you will come out a winner. And, your odds improve if you have a well-trained dog at your side. So if there is a bug out situation, you definitely want a dog at your side. It will give you peace of mind and also ensure you come out unscathed from the SHTF situation.

If you are skeptical about taking a dog as your companion for bugging out, here are 10 reasons to allay your fears and change your opinion.”

Read more on Backdoor Prepper.

NewSMDCover2

This article has been written by Drew Stratton for Survivopedia.

2 total views, 1 views today

Rate this article!
[Total: 0    Average: 0/5]



from Survivopedia
Don't forget to visit the store and pick up some gear at The COR Outfitters. How prepared are you for emergencies?
#SurvivalFirestarter #SurvivalBugOutBackpack #PrepperSurvivalPack #SHTFGear #SHTFBag

Friday, October 7, 2016

Ensuring your survival through solid neighborhood outreach

by, Jesse Mathewson

Adding to the tribe, being a benefit and not a drain: North-Eastern Washington and Disabled

“I delighted in being out in the worst of weather—snow-storms in winter, rain and gales all the year round. Cared nothing for, and felt no harm from being soaking wet either with salt or fresh water all day long—for a waterproof coat was never thought of.” John Rae (Highland Scot, Mountain-man)

“Although I had lost my rifle and all my plunder, I felt quite rich when I found my knife, flint and steel in my shot pouch. These little fixins make a man feel right pert when...

Read the whole entry... »



from TheSurvivalistBlog.net RSS Feed
Don't forget to visit the store and pick up some gear at The COR Outfitters. Are you ready for any situation?
#SurvivalFirestarter #SurvivalBugOutBackpack #PrepperSurvivalPack #SHTFGear #SHTFBag

EASY SEEDS TO SAVE

by Andrew Skousen

American pioneers pushing westward had to save their own seeds for next year’s planting if they wanted to grow anything again. I applaud people who are learning to garden today, but if you don’t learn to save seeds and start your own seedlings from them next spring your gardening skills won’t help much in hard times when the cheap seeds and nursery plants sell out at the stores. Fortunately, many seeds are extremely easy to save if you just let them develop fully, watch for the right time to harvest and dry them out for next year.

Beans and peas are very easy to...

Read the whole entry... »



from TheSurvivalistBlog.net RSS Feed
Don't forget to visit the store and pick up some gear at The COR Outfitters. Are you ready for any situation?
#SurvivalFirestarter #SurvivalBugOutBackpack #PrepperSurvivalPack #SHTFGear #SHTFBag

October 7, 2016 Miscellany News Brief

1.) ‘Monster’ Matthew slams into Florida with 100mph winds: 340,000 are already without power as anyone who has refused to evacuate is warned to hide or face fatal consequences.

2.) Hurricane Matthew sparks travel chaos: More than 3,800 flights are cancelled, trains are suspended and even Disney World is closed as East Coast braces for ‘direct hit’.

3.) Devastation: Aerial footage shows Haiti villages leveled by Hurricane Matthew as death toll climbs to at least 340 across the Caribbean.

4.) RUSSIA STRONGLY WARNS US AGAINST STRIKING SYRIAN ARMY: The Russian military on...

Read the whole entry... »



from TheSurvivalistBlog.net RSS Feed
Don't forget to visit the store and pick up some gear at The COR Outfitters. Are you ready for any situation?
#SurvivalFirestarter #SurvivalBugOutBackpack #PrepperSurvivalPack #SHTFGear #SHTFBag

10 Ways You Can Make Money On Woodworking

svp-10-ways-to-make-money-on-woodworking

Do you remember the days when people could pursue a regents diploma and go on to college instead of getting certified in a trade that would lead to an immediate job? In these days, a lot of factory and office jobs alike have moved overseas, so it is more important than ever to pick a trade that you can build a business around.

Given the number of disasters that can strike, a useful trade such as woodworking can save your budget, or turn into a trade you can sell in time of need. Either way, woodworking is fairly easy to learn and adapt to a wide range of applications.

We found at least 10 ways woodworking can help you earn good money, or at least save some resources that otherwise would go to waste. Find them below, then start looking for the proper tools and practicing your skills to make your own money out of woodworking!

10 Ways to Make Money as a Wood Worker

There are tons of projects you may be asked to work on if you are skilled in woodworking, now or in a post-crisis world. Here are ten of them, and remember that you can easily specialize in just one of these categories or offer a wider range of service.

Start your business off as a sideline, and then expand from there. Even though most of your customers will be in the local area during a major crisis, you can still use the internet to market your products to a larger audience.

  1. Repairing Furniture

I’m not the only person that has nailed a wooden chair back together or carried out other “minor” furniture repairs. It’s no surprise that many people also think wooden furniture repair is the easiest of the woodworking trades to get into.

On the other side, even if the item is relatively intact, repairing the structure and then refinishing the surface can be incredibly complicated. In particular, if the repair is going to work, the wood moisture over time must match in the new pieces and the old ones. You will also find it quite a challenge to match the exact varnish color (especially if it has faded or changed over time) and surface quality.

  1. Make New Furniture

Overall, you may find it easier and less time consuming to make new furniture from scratch. Try to create trademark designs or other elements that will grab the interest of prospective clients.

If you choose to make custom furniture, your capacity to create clear, attractive plans will also be very important. You may want to invest in a drafting table and better measuring tools so that you can create good quality sketches that your prospective clients can relate to.

Having a diverse supply of good quality wood is also essential for a business focusing on custom furniture. As you gain experience, you will organize your wood inventory by moisture matching levels and fits so that you can save a good bit of time between the planning and production stages.

  1. Toys, Utensils, and Small Items

If you are going to make a profit on small items, you will usually have to produce larger numbers of items in a short period of time. Use the internet while you can so that you can sell to a larger audience.

Many people that focus on small household items also rent tables at local craft fairs and other venues where people interested in their products might show up. You will also find that interest in these items will vary with the seasons. For example, toys may sell best during the holiday season while wooden utensils may have more appeal in the spring and fall.

  1. Building Construction and Repair

Overall, no matter how skilled you may be in woodworking, this is not a business you will want to go into alone. It is best to work with a team that has both good work ethic and skill so that you can meet the needs of your clients and maintain both good quality and safety standards. Before and after a major crisis, you are likely to find your services in high demand.

  1. Replacing Plastic Items with Wood

If you look around your home right now, there may be all kinds of plastic trays, drawers, and tubs that you use for storage. Figure out now how to replace these times with wooden ones, and you might come up with a range of products that can be sold when plastic is no longer available.

Create your own trademark designs as this can give you a lucrative edge in the pre-crisis world as well as later on. No matter how bad a situation is, a business or products that becomes a household name will always be easier to sell than something from a relatively unknown source.

  1. What About EMP Proofing?

Even though wood is an insulator, it cannot disburse an EMP pulse. You can still offer wooden boxes that can be converted to Faraday cages.

  1. Boxes, Containers, and Storage

Aside from conventional boxes and containers, you can also create secret compartment boxes and furniture. You can make some very intricate designs from wood scraps and leftovers and still command a good price for the finished product. Of all the business options presented in this article, this is the easiest one.

  1. Prototypes

It is truly part of human nature to try and invent new things. From better mousetraps to new car designs, you would be amazed at the number of things that can be made with wooden prototypes. While it may take a bit of extra work and time, you will enjoy the variety and challenges presented in this business option.

  1. Weapons

If you do some research on indigenous weapons, you will find many uses for wood. In the post crisis world, the ability to make spears and other weapons is bound to be important as people move to use their time on other occupations.

cncbanner_20

  1. Using Sawdust and Chips

Even though these are byproducts of woodworking, you may be able to sell them to others for use as insulation or for other purposes.

What You Need to Make Money from Woodworking

First, you need some woodworking tools, but as you look at the list below, you will probably find out that you already have quite a few of them.

If you must buy new tools, or want to replace existing ones, try to improve the quality of your collection, even if you must search through used or vintage tools. Go with a brand name, such as Craftsman, that is recognized for producing durable, high quality tools.

Hand Tools

Most common tools that you might already have are block plane, chisels, hammer, hand saws (including coping saws which can be used to make curves) knives (X-actos and utility knives), level, saw horses, screwdrivers, tape measure, saw horse, goggles. You can add other essential hand tools to your collection, as the following:

  • Calipers – no matter whether you are building furniture, toys, or other wood items, being able to create exact tolerances between two pieces of wood is very important. If you already do some woodworking, but do not have calipers, you will notice a tremendous improvement when you use these tools.
  • Feather Board – used to finish off edges when cutting wood with power tools. I made my own from scrap wood, as do most other woodworkers.
  • Hand Drill – even though most people use power drills, a hand drill is essential if you are concerned about situations where no power is available. You can still purchase vintage hand drills that are still in reasonably good shape. Do not forget to include a bit that accommodates circular cutout tools.
  • Layout Square (metal) – A layout square is a perfect combination of a protractor and 90-degree angle. You should also try to find one that includes an adjustable bevel so that it will be easier to plot other angles. Always choose metal measuring tools because they will not warp as easily as others.
  • Moisture Meter – even though this is technically an electronic tool, it is still very important for wood working. When you do not know the moisture level of the wood and how it changes over the seasons, you will have a very hard time making wooden times that will be durable and useful. A moisture meter is also very helpful for testing wood out before you buy it.
  • Nail Set – used for driving nails to just below the surface of the wood. Unsightly prints from hammer blows may not make much difference to you, however your clients will expect pristine surfaces on furniture and other items.
  • Wood Clamps – there is no such thing as working with wood and not needing to keep various pieces stable while you work on them. Wood clamps will hold pieces of wood together without damaging the surfaces.

Power Tools

These tools can make wood working a lot easier, faster, and more precise, but they also require a good bit of power. Typically, you can achieve the same goals with hand tools as long as you develop your skills and have both the time and patience to apply those skills.

  • Bench Grinder – you can use bench grinders to remove large amounts of wood or create curved shapes. Coping saws and files will do the same job, albeit slower. If you have an especially thick chunk of wood, you can also use chisels and knives to remove the wood.
  • Circular Saw – there is nothing quite like a circular saw for cutting straight lines fast. If you have the time and want to include some muscle building in wood working, handsaws will work just as well.
  • Jig Saw – jig saws are usually best for cutting curves and circles, or working in tighter areas than recommended for a circular saw. Usually, coping saws will accomplish the same goal, but it will take a bit longer. You will also need to store away quite a few extra coping saw blades as they usually cannot be re-sharpened like traditional handsaw blades. When all else fails, you can also use files and knives to make curves on wood boards.
  • Lathe – quite honestly, the lathe is one of my favorite woodworking tools, however I do admit that it’s not a tool you can bug out with easily (unless you buy a smaller one that more than likely won’t work very well). Lathes are used to produce rounded items from wood blocks. Rounded table legs, and many decorative items are made with relative ease using a lathe. You can still make these items with chisels and saws, however it will take a lot more time, and it will be much harder to get precision pieces from item to item.
  • Metal Detector – if you are going to repair furniture of scavenge wood from other items, it is very important to make sure that power tools don’t run into hidden screws, nails, or even staples. Aside from damage to the equipment, some very bad injuries can occur when bits of metal fly at you from broken blades or the metal object that was hidden in the wood.
  • Rotary Tool – if you want a compact “one power tool does all”, a rotary tool is about the closest you will get when it comes to wood working. There are all kinds of attachments that will enable you to use a rotary tool as a sander, router, drill press, hand drill, and jig saw (of sorts). If you don’t need to cut through especially large or thick pieces of wood, a rotary tool can make the job go faster and give you a bit of extra accuracy in less time than if you were working exclusively by hand. Just remember that you can still do the same things with hand drills, hand saws, coping saw, files, and sand paper.
  • Router – a router is used to make grooves and other shapes that do not go all the way through the wood. You can make your own “hand” router out of a chisel and block of wood, or other tools on an as needed basis. You may also still be able to find vintage hand powered routers at flea markets or online.
  • Sander – typically, orbital sanders are recommended for wood working because they use a more random motion that reduces the risk of creating markings in the wood. Some of the finest surfaces you will ever find on furniture were made by hand sanding. Never overlook the simplicity of working by hand when it comes to sanding. A power sander may work faster, but there is never a replacement or substitute for skill and fine workmanship.
  • Table Saw – as with the circular saw, a table saw is best for cutting large quantities of wood. If you have to choose between a circular saw and a table saw, go with the circular saw. Aside from doing similar jobs, you can always mount the circular saw to a table and then make your own guides so that you have something similar to a table saw.

Basic Skills to Master for Woordworking

Whether you choose to work with power tools or hand tools, you need to master a few essential skills in order to make money as a wood worker. These skills are not difficult to acquire; but you will still need to practice. Start off with cheaper, softer cuts of wood or scrap, and then work your way up to better cuts and quality.

Some people do better starting off with larger sized projects, while others may be better served by working with smaller scale designs. I have personally found that both large and small pieces of wood can be quite challenging. It may not take as much strength or work to shape a smaller piece of wood, hand to eye coordination and precision are tested far more with smaller pieces.

Rather than concern yourself with the size of the wood, choose softer wood so that you can learn to control the tools more easily and develop good habits. So here are the more important skills that you need for woodworking:

1. Planning Projects

Let’s say you want to build a cabinet. The worst thing you can do is simply measure the space where the cabinet will go and then go to the lumber yard for a few pieces of plywood.

Most, if not all wood working projects fail when people do not make detailed design plans before getting into the material acquisition process. You should know the measure for each piece of wood, the tolerances at each joint, how you will join the pieces together, and what kind of finish you will use once the pieces are assembled.

Maybe you aren’t building something that can be taken apart again, you need to plan everything out as carefully as possible. Even if you are just replacing a leg on a chair, always have a solid plan of action so that you get the right materials and use the right tools.

2. Cutting Wood

It’s fair to say that you will be doing a lot of cutting, so practice both straight cuts and curves. Always make your pencil lines as sharp and precise as possible.

At the beginning, you may find it a bit hard to stay on the line, or within double lines. Just be patient and keep practicing. Eventually you will get the optimal motion for hand tools and learn how to adjust to the forward motion and proper pressure needed to keep power tools going exactly where you want them to.

If you are having an especially hard time, try to at least cut outside the line in the waste area. Later on, you can always file or sand the wood down to the exact size or shape that you need.

3. Carving or Whittling

This probably one of the most enjoyable parts of wood working. You can use knives or chisels to make just about anything of interest. Try your hand at hollowed structures as well as intricate interlocking, free moving designs.

As you work, think about how you can apply these skills to making jewelry, toys, tools/tool handles, or even special accents for furniture pieces.

4. Joining Wood Pieces

Cabinets, buildings, toys, and many other items will require joining pieces of wood together. The actual process of nailing pieces of wood together, using screws, pins, or even glue is not especially difficult.

On the other hand, choosing and preparing the wood can be quite complicated. Take care of how the wood shapes will change as moisture enters and leaves the wood. Even the best sealants will not prevent the wood from breathing and changing as the moisture levels in the environment change.

Judging wood moisture and predicting its effects is one of the most important skills for woodworking. Contrary to popular belief, this isn’t something you can do from just one measure. Rather, it can take weeks, months, or even years to evaluate different pieces of wood before you can be certain they can be joined together for furniture and other intricate items.

5. Pins and Other Joining Methods

Right now, nails, screws, and glue are readily available, which is not the case in the post crisis world when you need to join pieces of wood together, but do not have these fasteners on-hand. Fortunately, there are some fascinating methods from around the world that you can practice and use whenever needed.

Learn how to make and use wood pins, box joints, bridle joints, and trench joints. Once you know how to make these, you can modify them to suit just about any application.

Where to Get the Wood From

If you expect to make money on wood working, your ability to obtain and store wood will be very important. Most of the wood you will need to master basic skill can come from free wood pallets. Just go to local stores in your area and ask if you can have their used pallets.

As you gain experience, you should also be able to store away better quality wood in a shed or other area where it will stay clean and dry. Sometimes you can find good quality wood in the form of discarded furniture at the dump, or other places where people get rid of furniture. Even if you have to strip varnish and other finishes off the wood, it can still be used in a range of applications and also give you practice with harder wood materials.

In these times, you can still get wood from a lumber yard, or order from a wholesaler, but these options are not likely to be available in a post-crisis world. More, simply trying to get wood from a nearby forest will put you in direct competition with others that want to use the wood for their own needs. In the long run, your best option is to create your own wood working orchard. Choose trees that will grow quickly, and still produce wood that will be suitable for a wide range of needs.

Grab your woodworking tools and start practicing yous kills! You can start a business focused on small wooden objects or hideaway containers. As you develop more skills or find a team to work with, you can also expand into making furniture or even building homes. Both now and in the post crisis world, woodworking is an important skill that you can profit from and use for your own needs at the same time.

CNCbanner

This article has been written by Carmela Tyrell for Survivopedia.

1 total views, 1 views today

Rate this article!
[Total: 0    Average: 0/5]



from Survivopedia
Don't forget to visit the store and pick up some gear at The COR Outfitters. How prepared are you for emergencies?
#SurvivalFirestarter #SurvivalBugOutBackpack #PrepperSurvivalPack #SHTFGear #SHTFBag

Thursday, October 6, 2016

Carbon M1 Super Fast 3D Printer Demo!

Carbon M1 Super Fast 3D Printer Demo!

via YouTube Video Don't forget to visit the store and pick up some gear at The COR Outfitters. How prepared are you for emergencies?
#SurvivalFirestarter #SurvivalBugOutBackpack #PrepperSurvivalPack #SHTFGear #SHTFBag

MICRO Pocket Tool Kit: 100 Items for Car, Truck, Bag, Kitchen Drawer etc.

MICRO Pocket Tool Kit: 100 Items for Car, Truck, Bag, Kitchen Drawer etc.

via YouTube Video Don't forget to visit the store and pick up some gear at The COR Outfitters. How prepared are you for emergencies?
#SurvivalFirestarter #SurvivalBugOutBackpack #PrepperSurvivalPack #SHTFGear #SHTFBag

What Can We Learn from History About Food When SHTF?

Written by Guest Contributor on The Prepper Journal.

Editor’s Note: This post is another entry in the Prepper Writing Contest  from Calamity Janet. If you have information for Preppers that you would like to share and possibly win cool prizes, enter today.


I’m always surprised, and often more than a little disturbed, when I hear folks say that when SHTF occurs, they’ll just go hunting, or they’ll trade for the food they need, or they’ve got a few boxes of MRE’s, so they’ll be fine. Such attitudes show a dismal lack of familiarity with history and what really happened in previous collapses. By learning about what happened, and knowing that history repeats, we can prepare better and avoid making the same mistakes when SHTF again.

I. Confiscation

Many countries around the world already have laws in place banning citizens from storing food in their homes. Fortunately, we have no such laws currently in the United States. However, we do have plenty of executive orders allowing FEMA to confiscate food for emergencies (and, of course, they get to define “emergency”). And we have historical precedent for the federal government to outlaw food “hoarding” and arrest individuals found in violation (see “Navy Man Indicted for Food Hoarding“). This man was betrayed by the grocer, but anyone from whom he purchased large quantities could have betrayed him, as well as anyone who could have observed the foodstuffs being carried into the home.

Lesson: Don’t discuss how much food you have with anyone. Don’t do all your shopping in one location. When you unload your groceries, do so in the garage with the door shut so that inquisitive eyes can be avoided.

II. Rationing

Whether in the name of fairness—making sure the poor are able to eat as well as the rich, making sure food gets to the troops, or merely controlling who gets the food—governments will ration food in times of crisis. During World War II, sugar was the first item to be rationed. Before ration books were received, individuals had to declare how much sugar they already had at home, and coupons in the books were adjusted accordingly. The allotment was one-half pound of sugar per person per week, so 26 pounds per year.

Rationing is frequently seen in times of shortage, regardless of cause.

Households preserving fruits by canning were allowed a special allotment of 25 pounds of sugar per person per year. This was about half the normal annual consumption at that time. Currently, Americans consume an average of 120 pounds of sugar per year. The next foods added to the rationed items were coffee (though there was an abundant harvest in South America, all shipping was being diverted for the war effort); meat, excluding chicken (for the troops); cooking oils (most oils at that time came from lands occupied by the Japanese, and lard was used by the Navy to grease their guns); processed foods (due to a tin shortage); and, canned milk (to ensure babies and children had enough).

Lesson: Build a generous food storage supply, and especially include those items are entirely or largely imported, including sugar, cocoa, coffee, and oils.

III. Gardening

As food becomes scarce, the need to grow one’s own becomes readily apparent. Fresh produce wasn’t rationed during any of the recent wars, but at times it was just unavailable. So everybody had gardens. One debate currently raging in the prepper world is whether to plant heirloom seeds or hybrid seeds. In reality, there should be no debate. Both kinds should be stored. Heirloom seeds should be used because they breed true generation after generation. Hybrid seeds should be planted as well because they tolerate a greater range of adverse conditions and have higher yields.

Victory gardens will sprout up everywhere during food shortages.

Victory gardens will sprout up everywhere during food shortages.

In addition, the most fortunate families already had several fruit trees producing on their property. While we may not need to worry about government confiscating home-grown produce, that doesn’t mean that our gardens are necessarily safe. Unfortunately, even today, before we have yet collapsed, we hear reports of gardens being raided. Invading armies in ancient times took whatever they easily could and frequently destroyed crops in the field that they couldn’t carry with them. But they generally avoided the so-called peasant foods—root crops such as potatoes, turnips, carrots, and beets. They were too much work.

Lessons: Grow your own food to the extent possible. Plant some fruit trees. If possible, harvest root crops only as they are needed.

IV. Hunting

People who say they’ll just hunt when food gets scarce must either believe that no one else will be hunting or that all the game will reproduce and grow to harvest size overnight. It just doesn’t happen that way! In times of turmoil, wildlife becomes scarce quite rapidly. In fact, game in many areas were hunted to the point of near extinction during the Great Depression. Furthermore, as animal populations decrease, the time required to hunt increases. Hunting may well become a luxury. Setting snares may prove to be a much better way to go.

Lesson: Don’t plan to feast on local wildlife when SHTF. At best it will be supplemental dog food.

V. Cooking

Particularly disturbing is the number of people who really do not know the basics of cooking and baking, not to mention having no familiarity with how to use camp stoves or Dutch ovens to prepare a simple meal. Most people, even preppers, eat from cans or packages that they pop in the microwave. Increasing numbers of people cannot make a simple loaf of bread. While it wasn’t a time of war or political or economic turmoil, a rather alarming percentage of the 49ers in the United States’ California gold rush died of disease because they were malnourished. Ninety percent of the 49ers were men; very few had brought their wives with them. Men wrote home to their families, apologizing for not recognizing the work they did in preparing food, and pleading with their wives and mothers to teach them how to cook rice and make biscuits.

Lessons: Learn how to cook and have hard copies of recipes.

VI. Trading

I’m always puzzled by the staggering number of people who proclaim that when SHTF they will simply barter for the food they need. Why not just store what you want so that you know you have it? Those that have food available for trading will be in the driver’s seat and setting the terms. Farmers prospered to an unbelievable degree in WWII Germany. Very early on they had all the hired help they could use—people who worked solely for meals and a place to sleep. As the war dragged on and even the wealthy were struggling to obtain food, the farmers began accepting Turkish rugs and handcrafted furniture in trade for a little food. Their wives had rings on every finger. The farmers needed nothing and could command the highest “prices” imaginable.

Bartering

Towards the end of the war, one man’s unrelenting begging finally persuaded the farmer to accept as payment an $8,000 family heirloom pocket watch as payment for a twenty-five pound bag of beans. That bag of beans sells for less than twenty dollars today. Just sayin’. But a person didn’t need to be a large-scale farmer to do well. I had an acquaintance whose friend in the Depression raised chickens. He bartered the chickens for items he wanted, but didn’t necessarily need. He would usually propose a trade that he knew would initially be rejected, but eventually the other guy would come around within a week or so. In one case he traded three chickens for a motorcycle the family could no longer use because gas was unavailable.

This gentleman built wealth for his family by offering goods that were in demand. Because we have drifted so far from our agrarian roots, many city and suburban dwellers will be easily fooled. Two families in Germany pooled their valuables to trade for a goat to produce milk for their children. Unfortunately, the city dwellers lacked some critical life skills. They ended up having to give the butcher half of the Billy goat as payment for butchering.

Lessons: Be able to raise your own food. Raise chickens or rabbits for barter. Learn some life skills. FFA and 4-H are good programs for children (and parents!) to learn to raise small and large livestock.

During World War II ration books enabled governments to control the food. The move toward a cashless society where every purchase is recorded on cards will make controlling food—and tracking who has it—much easier. Gather your food now. You can never really have too much. Learn principles of food storage—how and what to store, where to store it, how to cook it, how much you need. Pay with cash—no store rewards card, no Costco or Sam’s cards. Don’t lead the government to your door. Certainly don’t shop where you are known—don’t lead acquaintances to your door. In closing, remember what Henry Kissinger said in 1970: “Control oil and you control nations; control food and you control the people.”

If you liked this article, please rate it.

The post What Can We Learn from History About Food When SHTF? appeared first on The Prepper Journal.



from The Prepper Journal
Don't forget to visit the store and pick up some gear at The COR Outfitters. How prepared are you for emergencies?
#SurvivalFirestarter #SurvivalBugOutBackpack #PrepperSurvivalPack #SHTFGear #SHTFBag

5 Things That Make The Difference About Water Purification

Water Purification

The market is flooded with so many options that choosing the right path for purifying water for drinking turns into a challenge. There are water bottles that purify water as well as straws that allow you to drink straight from the stream. There are pills, and also filters in different sizes.

How could you say which one is best? Before making any choice, make sure that you know the tricks and traps of water purification so you won’t put your life at risk.

There are at least five things that make the difference when comes for water survival. We gathered them for you below, to help your prepping.

The Difference between Water Filtration and Water Purification

You need to understand the difference here because it’s critical to your decision. There are three types of disease-causing pathogens in water, not counting minerals and pharmaceuticals:

  • Bacteria: Some examples that you’ve probably heard of are E. coli and salmonella. There are many more and, so that you know what filter to look for, they can be as small as 0.1 microns, though a 1-micron filter will capture 99.9% of bacteria.
  • Protozoan Cysts: these are hardy little “eggs” that have an extremely hard shell. The only way to kill them is by boiling them but they can be filtered out. Examples include Giardia and Cryptosporidium. They range in size from 1-300 microns.
  • Viruses: Right now, these are rarely found in American or Canadian waters but that could change quickly if SHTF. Viruses include hepatitis A and rotavirus and range in size from 0.005-1 micron. Only purification by some means can remove these from the water; filters won’t work because the viruses are so small.

The Difference between Purified Water and Distilled Water

The debate about the health benefits of purified versus distilled water is a hot one. There are those who claim that they feel tons better since switching to distilled water and there are those that claim that distilled water is the devil.

Water already has minerals in it, but not after it’s been distilled or purified using reverse osmosis. Both of those processes remove most of the impurities – up to 99.5% of them – from the water, but also the “good” minerals along with the bad stuff.

Proponents of re-mineralizing water advocate the process for a few different reasons.

  1. You need the minerals, especially if you’re not eating properly or you’ve been out in the heat sweating. The primary minerals that your body needs to replenish are calcium, magnesium, potassium and salt, though there are many others, too.
  2. Re-mineralized water quenches thirst better and is absorbed by your body faster. This is a point of contention but the argument for faster hydration states that adding minerals back into the water boosts the pH and brings it back to an alkaline state. The water becomes ionized, which makes the water molecules cluster into smaller groups, which makes it easier for your body to absorb.
  3. Re-mineralized water tastes better. Though this is subjective, it’s true that the human palate is used to the flavor of water with minerals in it. It gives it a fuller flavor (that is to say, it gives it SOME flavor) that many people find preferable to distilled water.

This Survivopedia article includes some options for those who want to know how to re-mineralize water for drinking.

Reverse Osmosis and Distillation, by Themselves, Do Not Remove All Harmful Agents

Reverse osmosis filters out the clean water and pours the excess water, or brine, down the drain. Most systems lose about 3 gallons of brine to get one gallon of fresh water. Many people adjust for this by re-routing the brine to a bucket that they use for watering plants or other uses that don’t require purified water.

Distillation mimics the hydrologic cycle of evaporation (boiling to steam), precipitation (precipitation in an apparatus), normally a condensing coil), and condensation leading to rain (water cooled usually by a fan and and drips into a sterile container). Some chemicals evaporate and re-condense, just like the water, and pass through with the “pure” water.

Be careful when choosing your water filter, and remember that all reputable RO and distiller units are always coupled with good carbon filtration, preferably carbon block, to ensure removal of these contaminants.

Reverse Osmosis

 

Drinking Salt Water Kills You Faster Than Thirst

Though our planet is covered in water, only one half of 1 percent is drinkable! For example, people who live in coastal regions are surrounded by water but it does them no good because one of the quickest ways to die of dehydration is to drink salt water.

There are ways to make that water potable, though, and science is finding even more ways. In order to turn salt water into drinking water, you need to desalinate it first. That just means that you need to remove the salt. There are many methods for doing this but the most efficient and realistic way to do it at home in a survival situation is by using the distillation by evaporation method.

One of the easiest ways to convert salt water to drinking water is by using heat. You simply heat the water until it turns to steam, then capture the steam.

Basically, the water will evaporate but the salt and other impurities won’t. The problem here is that it requires a ridiculous amount of energy in the form of heat to get the job done. Still, it’s effective and if you combine the process with others, such as cooking or heating, you won’t be wasting nearly so much fuel.

Read this Survivopedia article on how to turn salt water into drinking water to discover a few methods of distillation by evaporation.

Tap Water Is NOT Safe!

We walk to the kitchen, turn on the tap and pour ourselves a big glass of that elixir of life: water. We assume because it has gone through the city water purification plant that it’s safe to drink. Wrong! According to some sources, water contamination makes 2 million Americans sick every year and that number will increase exponentially if SHTF.

Regardless of the water source, there’s always a chance that the water that you’re drinking is contaminated. There are many different ways that this can happen; in your home, it can be from outdated plumbing or antiquated water purification methods or equipment that don’t filter out modern-day contaminants such as pharmaceuticals and chemicals.

If you have a well then draught, flooding, mining activity or hydraulic fracking in the area can disrupt the water tables and contaminate your water.

Streams and other unpurified water sources can be polluted by chemicals, pesticides, antibiotics and fertilizers caused by runoff from nearby industrial plants or farms. They are also vulnerable to leaky sewage systems as well as animal defecation. Even acid rain and smog can pollute water.

Hexavalent Chromium (aka Chromium 6), lead, arsenic and fluoride are only a few top pollutants and contaminants found in water so that you know what to test for. There is more to add to this list if you read this Survivopedia article on the topic.

Do you have other concerns about water purification that we should know about? If so, tell us about them in the comments section below.

18_620x140

This article has been written by John Gilmore for Survivopedia. 

1 total views, 1 views today

Rate this article!
[Total: 0    Average: 0/5]



from Survivopedia
Don't forget to visit the store and pick up some gear at The COR Outfitters. How prepared are you for emergencies?
#SurvivalFirestarter #SurvivalBugOutBackpack #PrepperSurvivalPack #SHTFGear #SHTFBag

Wednesday, October 5, 2016

Choosing the best low-cost survival knives for preppers on a budget – Reviews of three knife manufactures that you can rely on for quality

Written by- Jesse Mathewson

knives-budgetOne of the most underrated and over marketed essential components of a bugout, survival, bush crafters kit are the knife, or in my case knives. Since the rollover in 2000 and failure to collapse of anything at that time, the prepper, survival world has blossomed as an entirely new industry.

This has led to knife builders getting into designing knives for large production companies versus the plethora of smaller individual builders that used to exist. There are now machine shops producing show stopping advanced design knives, however, are any of these modern art...

Read the whole entry... »



from TheSurvivalistBlog.net RSS Feed
Don't forget to visit the store and pick up some gear at The COR Outfitters. Are you ready for any situation?
#SurvivalFirestarter #SurvivalBugOutBackpack #PrepperSurvivalPack #SHTFGear #SHTFBag